HydroHub™ H-Power Heavy-Duty PEM Enhancement System
Heavy-duty PEM hydrogen-oxygen Combustion Enhancement Unit for diesel and gas engines up to 7.0 L displacement — line-haul trucks, medium prime movers, commercial equipment and stationary 20 – 30 kW generator sets. Produces up to 900 ml/min mixed H₂/O₂ at 160 W from a 2 L deionised-water reservoir, packaged in a vibration-isolated industrial cabinet with onboard ion-exchange polisher.
Suitable for diesel 4×4 fleet vehicles, compatible with mining and off-road transport, and ideal for utes, vans, and 4WD fleet vehicles.
Free worldwide delivery — DDP (duty paid). No customs charges on arrival.
Duties & taxes are included on most destinations. Select your country for the exact arrangement.
Scenario modelling only — pick your own assumed reduction. Not a prediction.
Published price. Buy today — no quote required. One unit is enough to start a field evaluation on your own duty cycle.
Ordering multiple units? Bulk pricing is available — Request a Fleet Quote →
Hardware-only supply. See the installation guide for the full fitting process before you order.
Dual-layer anti-flashback design, no gas storage. Why oxyhydrogen is safe by design
Fleet trial programme →Free worldwide delivery. Duties & taxes included on most destinations; where pre-payment isn't permitted, the carrier collects them on arrival. 12-month manufacturer warranty. See Shipping & duties by country for the exact arrangement for your destination.
Inside DH Power Oxyhydrogen Engine Kit
Factory build and quality-assurance footage: cabinet assembly, PEM stack and internal plumbing inspection before dispatch. Tap the video for sound and playback controls.
Factory footage · not an installed or running system
Factory build shown: HydroHub DH Power
Recommended unit for generator sets and heavy commercial engines
The H-Power matches the gas output of the A-900 (900 ml/min) in an industrial-duty cabinet built for behind-cab, under-chassis or pad-mount installation. It is the recommended unit for 20 – 30 kW generator sets and heavy commercial transport — same hydrogen output as the compact A-900, with sealed cabinet, vibration isolation and onboard ion-exchange polisher suited to continuous-duty service.
- ▸Heavy commercial trucks & prime movers up to 7.0 L
- ▸20 – 30 kW diesel & natural-gas generator sets
- ▸Enclosure / cabinet, behind-cab or pad-mount fitment
- ▸Continuous-duty industrial packaging
- ▸Recommended unit for most generator-set deployments
Compact vehicle and light commercial duty. Large passenger vehicles, 4WDs and light commercial up to 7.0 L in the compact engine-bay enclosure.
Same 900 ml/min output in an industrial cabinet. Recommended for 20 – 30 kW generator sets and heavy commercial transport — vibration-isolated, behind-cab / pad-mount, onboard ion-exchange polisher, continuous-duty packaging.
Which system is right for me?
Match the system to your vehicle, engine and operating environment. Your current selection is highlighted; tap any other row to compare side-by-side.
- Vehicle
- Passenger cars · light vans · taxis
- Engine
- 1.0 – 1.8 L · gas / diesel / LPG / hybrid
- Use
- Daily-driver fuel-economy & emissions reduction
- Vehicle
- Sedans · SUVs · crew-cab utes · service fleets
- Engine
- 2.0 – 2.5 L · gas / diesel / LPG / hybrid
- Use
- Mixed-duty fleet operation
- Vehicle
- 4WDs · light trucks · light commercial
- Engine
- 2.7 – 7.0 L · gas / diesel
- Use
- Large passenger & light commercial duty
- Vehicle
- Heavy commercial trucks · 20–30 kW gensets
- Engine
- Up to 7.0 L · diesel · natural gas · LPG
- Use
- Continuous-duty industrial · generator sets
- Vehicle
- Prime movers · road trains · large gensets
- Engine
- Up to 16.0 L · diesel · natural gas · LPG
- Use
- Line-haul transport · large stationary engines
Between sizes? Choose the larger system — running below rated capacity extends stack life. Indicative delivered prices shown; freight, duties and taxes included on most destinations. See Shipping & duties by country.
Technical specification
Catalogue specification. Real-world figures depend on engine condition, duty cycle, installation quality and ambient.
| Rated engine displacement | Up to 7.0 L |
|---|---|
| Mixed H₂/O₂ output | 900 ml/min |
| Voltage | 12 / 24 V DC |
| Current / power | 0 – 14 A · 160 W |
| Water tank | 2 L |
| Water quality | Deionised / distilled, TDS ≤ 5 µS/cm |
| Shipping carton | 22 × 20 × 22 cm |
| Packed weight | 11 kg |
| Fuel compatibility | Diesel · natural gas · LPG · gasoline |
| Duty | Continuous (genset) · cyclic (transport) |
Does this need a separate power source?
No. The system draws directly from the vehicle or genset's existing 12/24V electrical system — no separate battery bank, power supply, or generator required.
No projected, typical or expected fuel-saving figure is published. Actual results vary materially with engine condition, duty cycle, load profile, fuel quality, installation and operating conditions. A controlled field evaluation on your own equipment, with baseline data captured before installation, is required before any commercial projection.
Evidence for this system: the measured HHO fuel savings evidence and PEM hydrogen fuel savings data we publish, with test conditions, are in field results, and the baselining method is set out in fuel efficiency. Power and driveability observations are in engine performance, exhaust-side observations in emissions reduction, and you can model your own duty cycle with the fuel savings calculator.
System Dimensions
Heavy-Duty Series
Behind-cab · under-chassis · pad-mount enclosure
Industrial-duty cabinet with vibration isolation and onboard ion-exchange water polisher. Suitable for continuous-duty service (generator sets) and cyclic-duty transport applications.
HydroHub™ H-Power Heavy-Duty PEM Enhancement System — Frequently Asked Questions
Will this work with my engine?
Match the unit to your engine displacement. If you are between sizes, choose the larger one. For mixed fleets the Compare page lists all 5 units side-by-side.
Do I need to modify the engine or ECU?
No. The unit is installed non-destructively. Mixed hydrogen-oxygen gas is introduced upstream of the air intake; the fuel system, ECU and after-treatment are not modified.
Does this need a separate power source?
No. The system draws directly from the vehicle or genset's existing 12/24V electrical system — no separate battery bank, power supply, or generator required.
What water do I use?
Deionised or purified water only — TDS ≤ 5 µS/cm. The onboard ion-exchange resin polisher (heavy-duty units) maintains feedwater quality. Do not add caustic electrolyte.
How long does shipping take?
Compact units typically dispatch in 3 – 7 business days; heavy-duty units in 7 – 14. Freight time depends on destination.
Is the unit covered by warranty?
Yes — 12-month limited warranty on stack, electronics and cabinet. See the Warranty page for full terms.
Maintenance & accessories
Heavy-duty systems include an onboard ion-exchange water polisher for continuous-duty service. Browse the accessories catalogue for spares, harnesses and installation kits.
Technical background
This unit uses PEM/SPE (solid-polymer) electrolysis of deionised water, with no potassium hydroxide electrolyte. The references below describe the electrolysis architecture, the combustion mechanisms involved and the published evidence, including studies that report no measurable benefit.
- PEM vs alkaline electrolysisSolid-polymer, pure-water cells compared with KOH electrolyte cells.
- hydrogen combustion enhancement principlesFlame speed, ignition delay and the conditional nature of reported efficiency effects.
- engine applications for PEM/SPE oxyhydrogenDiesel engines, generator sets, furnaces, fixed industrial and marine engines.
- 2026 Scientific Reports HHO study reviewWhat the HG80 alkaline experiment tested, and what it does not establish.
Combustion Enhancement provides the technical evidence and PEM/SPE oxyhydrogen research. Hydrogen Machines supplies the commercial PEM/SPE systems.
These are combustion-enhancement devices. No emissions-compliance or fuel-saving guarantee is expressed or implied. Professional installation and controlled field evaluation are recommended.
Requirements for aftermarket devices vary by country and, in the US, by state. Read the full regulatory note for US and other buyers →
Why oxyhydrogen is safe by design — dual-layer anti-flashback engineering →